Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped functioning, it could be due to an unresponsive battery in the coin-cell, damaged receiver modules, water issues, or even a defective chip. These are all simple solutions that will get your car back up to speed in a matter of minutes!
Car keys can also become faulty because the key blade gets worn. You can easily solve this issue by visiting your local Car Key Man Auto Locksmith to get a new blade installed.
Battery
The key fob inside your Peugeot 308 may die or become weak enough to not send a powerful signal. This can cause the key fob to cease working, preventing you from opening and locking the doors or starting your engine. You'll need a new battery for your key fob to repair this.
You'll need to buy batteries for replacement from an auto parts store or a local hardware store. Make G28 Car Keys that the battery is brand new and not stored on the shelf too long. A fresh new battery will have greater capacity and can send a stronger signal to the car.
After replacing the battery If you have a new battery, try unlocking and locking the doors of your Peugeot by using the key fob. If the doors aren't unlocking it's likely that the receiver module in the car is the culprit. The local Peugeot dealer can reprogramme the receiver module.
It's also possible that the key fob's internal chip is damaged. This could happen if drop your key fob on the ground or expose it to water. The rubber seals that protect your chip from moisture could be worn out over time. This is especially true when you expose your key fob to water for long periods of time, such as submerging it in the ocean or in the ocean. To avoid this occurring, it's crucial to keep your key fob free from moisture and never let it come into contact with water.
Water Damage
Don't give up on your key fob if it gets wet, no matter if you dropped in the pool or slipped into a pool. Although the key fob is equipped with rubber seals which should shield it from water, long-term exposure to water may cause damage to the electronic chip. Since water is a good conductor so any water that makes it inside the key fob can cause a chain of short circuits which will eventually ruin the chip. After removing the battery, clean its contacts with isopropyl Alcohol and dry it completely before putting it back into.
A dead battery may be the reason why your Peugeot 308 won't start. Jumper cables are an excellent method to start the engine if you have an additional vehicle. If the battery is faulty and needs to be replaced, it should be replaced.
A malfunctioning receiver in the car can also prevent it from receiving the signal from the key fob. The key fob might be damaged or there may be an issue with the antenna, wiring or key fob itself. It may be necessary to programme a new key fob to your vehicle if you are using one. If you are unable fix the problem, contact a professional technician. A trained technician will be able determine the issue quickly and resolve it in a timely manner.
Radio Interference
The signs of a key fobs not being recognized or having a narrow range typically indicate that there is an interference in the system. It is either radiated or conducted, with the former being caused by power supply cables and speaker wiring that is too close to electrical components. Generally, rerouting the cables or moving them away from the components can resolve the issue.
It's unlikely that someone is listening in on the key fob's signals to take your car away, but it's possible that your signal has been drowned out by radio frequency interference. This is a straightforward issue to repair.
If you're having issues with your keys that are not recognized, try a new battery. Make sure the battery is of the correct size and type. If the battery is not properly sized, it could damage the fob.
Some alarm systems that are sold on the market and radar detectors use the same radio frequency as your key fob which can cause them to interfere with your key signals. Beware of attaching these devices to your key fob.
Pairing Issues
The remote keyless entry system in the car is equipped with a receiver which receives radio signals from the key fob. It will not be possible to start your vehicle if the receiver isn't working even if the key fob works and can be reprogrammed. The issue could result from a variety of causes, including the battery of a coin that is dead and water damage. The receiver could also be faulty due to a software issue or internal damage to the key.
One of the most common reasons that your Peugeot 308 key fob isn't working is because the battery inside has failed. You can replace it by a new battery however, it is essential to get the right battery for your key fob. It is best to choose a battery that is the same size in terms of voltage, size, and specifications as the original.
Your Peugeot 308 keyfob may not function if it was connected to a different vehicle. This could happen if you have given your key fob to someone else or in the event that the key was used to unlock or start other vehicles. This can be resolved by reprogramming the key fob using an OBDII scanner. This tool typically asks you for specific information regarding your vehicle, for example the VIN or engine type, so it's crucial that you enter this information correctly.